Answer
Sep 28, 2020 - 08:46 AM
Coach does not power up after 128 seconds after connecting to shore power.: Check the Caution When Flashing light (Red LED). If this light is blinking on and off, you could have a fault condition on your AC shore power which means the voltage for Line 1 or Line 2 is either too low (under 102V), too high (over 132V), or that you have a Reverse Polarity condition (ground and hot lines coming into the RV are reversed, or an open conductor). If you are using the Optional Remote Display, you can also view these faults on the LCD screen.
Caution When Flashing light is red and blinking.: This is normal when you first connect the Surge Guard to shore power. It will flash on and off for 2 minutes when you first power it up. Then, if shore power is good, it will stop flashing and connect power to your RV. If the Surge Guard has been in use for a while and it starts blinking after power has been good, then a fault has occurred with your shore power. This indicates that you have an Under Voltage, an Over Voltage, a Reverse Polarity fault or a Faulty Ground. In this case please notify your park of the condition in order to correct the fault.
A fault occurs such as a low or a high voltage during normal operation when shore power is within good operating range: Surge Guard will turn off power to the RV, and the Caution When Flashing light will start blinking. Also the Line 1 and/or Line 2 light will turn red if you have an Under Voltage or Over Voltage fault. If the power returns to normal, the Caution Light will start blinking or the Remote Display will show “DELAY” on the LCD screen and will wait 128 seconds before turning power to the RV back on.
Caution When Flashing light is red and blinking.: This is normal when you first connect the Surge Guard to shore power. It will flash on and off for 2 minutes when you first power it up. Then, if shore power is good, it will stop flashing and connect power to your RV. If the Surge Guard has been in use for a while and it starts blinking after power has been good, then a fault has occurred with your shore power. This indicates that you have an Under Voltage, an Over Voltage, a Reverse Polarity fault or a Faulty Ground. In this case please notify your park of the condition in order to correct the fault.
A fault occurs such as a low or a high voltage during normal operation when shore power is within good operating range: Surge Guard will turn off power to the RV, and the Caution When Flashing light will start blinking. Also the Line 1 and/or Line 2 light will turn red if you have an Under Voltage or Over Voltage fault. If the power returns to normal, the Caution Light will start blinking or the Remote Display will show “DELAY” on the LCD screen and will wait 128 seconds before turning power to the RV back on.
Add New Comment