Answer
Jul 01, 2020 - 09:38 AM
Re-Calibration of RV EzLevel The EzLevel comes calibrated but may need to be recalibrated from time to time to insure acuracy. If the EzLevel seems to be acting irrationally making it difficult to level the RV, please refer to the instructions below.
1. Place the EzLevel on a flat surface like a dinning table, oriented so that the EzLevel logo is on top (it does not have to be a level surface). 2. Push the power button to activate EzLevel 3. Push and hold power button for 10 seconds, when lights go OUT, let go of button. 4. When all lights go red, rotate the Ezlevel 180 degrees in the same spot (the EzLevel logo should be upside down at this time.) 5. Push the power button for 1 second and let go. 6. The lights will go off and then go red for a few seconds then resume normal operation. 7. The EzLevel is now re-calibrated.
1. Place the EzLevel on a flat surface like a dinning table, oriented so that the EzLevel logo is on top (it does not have to be a level surface). 2. Push the power button to activate EzLevel 3. Push and hold power button for 10 seconds, when lights go OUT, let go of button. 4. When all lights go red, rotate the Ezlevel 180 degrees in the same spot (the EzLevel logo should be upside down at this time.) 5. Push the power button for 1 second and let go. 6. The lights will go off and then go red for a few seconds then resume normal operation. 7. The EzLevel is now re-calibrated.
Add New Comment