Answer
May 15, 2020 - 06:50 AM
The AWM910 has two power wires - a wire asking for constant voltage and a wire asking for switched voltage (like an ignition etc). When the switched wire is met with 12V, the unit should automatically power on much like a car radio comes on when you key the ignition. If both of our wires are ran to constant power then there would be no telling when the unit would come on. You could verify the red wire is on a switched source, it should never power on if there is no power to the red wire. If the red wire is connected to constant voltage then you could install a switch to operate power to the unit.
Add New Comment