Answer
Jul 03, 2018 - 06:27 AM
When the Surge Guard 41260 Automatic transfer switch unit does not engage shore contactor when shore power is present after 3-4 seconds, check the wiring from the pedestal to the input terminals of the ATS. If the terminals are wired incorrectly, the transfer switch has a protective feature to prevent the transfer switch from engaging the contactor under a reverse polarity condition. Turn off the circuit, unplug the RV from the shore pedestal and correct the input wiring. This information is listed in the troubleshooting guide, you can find this here -->
https://www.rvupgradestore.com/v/vspf...
https://www.rvupgradestore.com/v/vspf...
Add New Comment