Answer
Mar 22, 2018 - 05:42 AM
Below is a link to the manual for the Air Force One Brake System. It shows installation, how to test installation and then operation.
https://www.rvupgradestore.com/v/vspf...
Operation:
The SMI Air Force One requires no adjustments or maintenance. Under all circumstances and in all towed vehicles it will always mirror the brake pedal of the coach. When preparing to tow, connect the Air Force One jumper, breakaway cable, and the notification light. Start the coach and allow it to air-up completely. After the coach’s tanks are at full pressure, depress the Coach’s brake pedal completely and hold it for at least three seconds. This will do two things: allow you to verify that the unit is connected properly and fully charge the breakaway-reserve tank. This completes the setup and pretest of the Air Force One system.
https://www.rvupgradestore.com/v/vspf...
Operation:
The SMI Air Force One requires no adjustments or maintenance. Under all circumstances and in all towed vehicles it will always mirror the brake pedal of the coach. When preparing to tow, connect the Air Force One jumper, breakaway cable, and the notification light. Start the coach and allow it to air-up completely. After the coach’s tanks are at full pressure, depress the Coach’s brake pedal completely and hold it for at least three seconds. This will do two things: allow you to verify that the unit is connected properly and fully charge the breakaway-reserve tank. This completes the setup and pretest of the Air Force One system.
Add New Comment