Answer
Aug 09, 2017 - 03:03 AM
If your Thor has a Ford 450 chassis then yes this leveling system will fit. Below is a link for the installation manual. If you have a Class C Ford 450 chassis style you could also go with one of the Bigfoot leveling systems linked below. Hope this info helps.
Step 1: Determine where the jacks will be mounted. The jacks must be mounted to the chassis frame, as close as possible to the front and rear axle's.
Step 2 (Jacks): Secure the jack brackets in place with c-clamps and weld the brackets to the frame. Bolt the jack to the bracket using washers on the bolt head and the nut. The jacks must be installed with a minimum of 7 to 8 inches of ground clearance. See Installation chart below. In any case, the bottom of the footpad should be no lower than any other item mounted on the coach. Pay particular attention to the angle of departure for the chassis when mounting the rear jacks- and the angle of approach when mounting the front jacks.
https://www.rvupgradestore.com/v/vspf...
https://www.rvupgradestore.com/catego...
Step 1: Determine where the jacks will be mounted. The jacks must be mounted to the chassis frame, as close as possible to the front and rear axle's.
Step 2 (Jacks): Secure the jack brackets in place with c-clamps and weld the brackets to the frame. Bolt the jack to the bracket using washers on the bolt head and the nut. The jacks must be installed with a minimum of 7 to 8 inches of ground clearance. See Installation chart below. In any case, the bottom of the footpad should be no lower than any other item mounted on the coach. Pay particular attention to the angle of departure for the chassis when mounting the rear jacks- and the angle of approach when mounting the front jacks.
https://www.rvupgradestore.com/v/vspf...
https://www.rvupgradestore.com/catego...
Add New Comment