Answers
Jun 27, 2016 - 05:05 AM
You will run water through the diverter for 20 minutes of brine rinsing the system.
Here are the user manual for reference --> http://www.rvupgradestore.com/v/vspfi...
Here are the user manual for reference --> http://www.rvupgradestore.com/v/vspfi...
Jul 24, 2017 - 04:56 AM
Here are the instructions for back flushing.
Back flushing is performed by feeding water into the outlet port of the system. Allow water to flow out of the inlet connection at a rate of one gallon per minute. This reverse flow process mechanically cleans the resin bed. If back flushing is being done along with a regeneration process the back flush should be done first. Back flush for 20-30 seconds and you will use the restricted side of the y-valve which has a pinhole plug in it for 1 GPM.
Back flushing is performed by feeding water into the outlet port of the system. Allow water to flow out of the inlet connection at a rate of one gallon per minute. This reverse flow process mechanically cleans the resin bed. If back flushing is being done along with a regeneration process the back flush should be done first. Back flush for 20-30 seconds and you will use the restricted side of the y-valve which has a pinhole plug in it for 1 GPM.
By
The Manual states 20 mins for regeneration. No time is mentioned for the backflush!
By
Admin did not answer the question!!!!
Add New Comment