Do you have the same question? Follow this Question
Apr 08, 2016 - 12:55 PM
View all Weight Distributing Hitches Questions & Answers
We’ve provided several answers to questions related to Equal-i-zer 90-00-0600 Sway Control Hitch With Shank - 600/6,000 Lbs , see some other helpful Q&A related to this product.
Question: Can I buy a new L pin for this model sway control hitch?
Answer: Below is a link to the Snap L-Pin replacement for the standard L-pin and cotter clip used to secure the weight distribution bars onto the L-brackets. The is also a link for the original style too.
https://www.rvupgradestore.com/Equali...
https://www.rvupgradestore.com/Equal-...
Question: Why is it illadvised to bach up tow vehicle with weight distributing devise engaged?
Answer: With the Equal-i-zer 90-00-0600 sway control hitch, you normally don't need to disconnect the spring bars or disengage the hitch before backing up. This hitch is designed to allow backing and tight turns while the weight distribution and sway control are engaged. The warning about not backing up usually has to do with systems that have a separate add-on friction sway control bar. The Equal-i-zer hitch has built-in 4-point sway control, so there is no separate sway bar to remove. Some popping or creaking during backing up or tight turns is normal because of the friction points in the hitch. Just make sure the hitch is properly installed and within its 600 lb tongue weight, 6000 lb trailer weight rating.
View all Equal-i-zer 90-00-0600 Sway Control Hitch With Shank - 600/6,000 Lbs Questions & Answers
We look to ensure that every question is answered by the best people with relevant expertise and experience, the best answers include multiple perspectives. Do you have relevant expertise or experience to contribute your answer to any of these commonly asked questions?
Add New Comment