Answer
Sep 22, 2015 - 08:04 AM
They are not very clear on that point, I will agree. The Seelevel system utilizes your present LP sender to determine the propane level. So you will not be using one of the Seelevel senser on your propane tank. Once you tie into your propane wire and fill your propane tank to full, you program the seelevel monitor to read that level.
Here is the procedure to calibrate the LPG sender:
1. The LPG tank must be full when the sender is calibrated, otherwise the calibration will be invalid. Fill the LPG tank by using an alternate measurement method, such as weight, a spit valve, or a mechanical gauge on the tank.
2. To calibrate, press and hold down the LPG button, the display will show some LPG level.
3. While continuing to hold down the LPG button, press and hold down the BATT button. Continue to hold down both buttons for about 5 seconds until the display shows “LPG”.
4. When this occurs release both buttons, the display will show “CAL” for a second and then shut off, completing the calibration procedure.
5. The LPG can be recalibrated as many times as desired, although recalibration should not be needed unless the LPG tank sender or the display has been replaced.
Here is the procedure to calibrate the LPG sender:
1. The LPG tank must be full when the sender is calibrated, otherwise the calibration will be invalid. Fill the LPG tank by using an alternate measurement method, such as weight, a spit valve, or a mechanical gauge on the tank.
2. To calibrate, press and hold down the LPG button, the display will show some LPG level.
3. While continuing to hold down the LPG button, press and hold down the BATT button. Continue to hold down both buttons for about 5 seconds until the display shows “LPG”.
4. When this occurs release both buttons, the display will show “CAL” for a second and then shut off, completing the calibration procedure.
5. The LPG can be recalibrated as many times as desired, although recalibration should not be needed unless the LPG tank sender or the display has been replaced.
Add New Comment