Answers
Aug 26, 2015 - 02:29 AM
Below are the installation steps. You can also access the accommodating pictures of these steps by clicking the instructions & manuals tab located in the part.
1. Place valve extender through hand hole and thread onto inner wheel valve stem as shown.
2. Place center hole of stabilizer onto valve extender. Be sure flat side of stabilizer is facing outward (see diagram).
3. Slide one edge of stabilizer onto hand hole on wheel. NOTE: Stabilizer attaches to hand hole of wheel, not to the stabilizer.
4. Push stabilizer toward inside of wheel until other side can be secured on hand hole. NOTE: Pliers may be needed to complete this step.
1. Place valve extender through hand hole and thread onto inner wheel valve stem as shown.
2. Place center hole of stabilizer onto valve extender. Be sure flat side of stabilizer is facing outward (see diagram).
3. Slide one edge of stabilizer onto hand hole on wheel. NOTE: Stabilizer attaches to hand hole of wheel, not to the stabilizer.
4. Push stabilizer toward inside of wheel until other side can be secured on hand hole. NOTE: Pliers may be needed to complete this step.
Add New Comment