Mar 12, 2020 - 02:56 AM
You need to remove the legs. You need a 1-1/16" socket and an extension. There is a jam nut on the inside you need to take off. Then use a 1-1/8" socket on the bolt head and take it out. There will be a square nut and washer on the inside of the tubing the bolt goes in to. When re assembling, hold the square tubing upside down so the parts on the inside do not fall out. Tighten the bolt and then take the jam nut and tighten back on the inside of the tubing. Use a new jam nut, once you take a nylox nut off, they do not stay tight very well anymore.